Wayne CDUCAP725 - 1/3 HP Cast Iron Switch Genius Submersible Sump Pump
Your Online Wayne Backup Sump Pump Superstore.
|
 |
Wayne 1/3 HP Cast Iron Switch Genius Submersible Sump Pump
Switch Genius™ Technology • The most reliable switch on the market today • Lasts 5 times longer than standard float switches • Electronic water sensor means no adjustments needed
Epoxy Coated Cast Iron Construction • Offers years of reliable, trouble-free operation
Thermally Protected Motor • Oil-filled, prevents overheating
Reinforced Poly-Carbonate Impeller • Offers reliable pumping
Top Suction Screen Filters • Prevents debris from damaging motor
High Capacity 1½” NPT discharge • Adaptable to 1¼” discharge
Designed for 11” diameter or larger sump basins
Will replace most submersible sumps without any plumbing changes
|
| Model |
| Model Number: | CDUCAP725 |
| UPC: | 040066212191 | | Manufacturer: | Wayne | | Housing Material: | Cast-Iron | | Min Sump Basin Size: | 11 Inch |
| Motor |
| Thermal Protection: | Yes | | Power Cord Length: | 8 Feet | | Oil Free Motor: | No |
| Pump |
| Float Type: | Intelli-Sense/Switch Genius | | GPH @ 0 feet: | 3450 GPH | | GPH @ 5 feet: | 3450 GPH | | GPH @ 10 feet: | 2700 GPH | | GPH @ 15 feet: | 1700 GPH | | GPH @ 20 feet: | 100 GPH | | Discharge Port Size: | 1-1/2 Inch | | Built-in check Valve: | No |
| Overview |
| Float On: | 9 Inches | | Float Off: | 4 Inches | | Manual Override: | No | | Solid Handling: | None | | Weight: | 15 Lbs. (6.80 kilograms) | | Dimensions: | L x 9.75W x 11.5H (0.00 x 24.77 x 29.21 cm) | | Consumer Warranty: | 5 Years | | Spec Sheet: | View PDF  | |
|
Average Rating: 3.7 of 5.0
|
|
|
     |
Written March 15, 2010 |
| Switch needs help, part 2 |
| By Dan (Remington, IN) |
I called Wayne and learned that the problem I was having is because my water softener discharged into the sump pit (which the pump is not designed to handle).
The brine was leaving a film on the switch.
I have since rerouted my softener and now the pump is working as it should.
SPD RESPONDS: Thank you for posting "the rest of the story"! |
 |      |
Written December 03, 2009 |
| Switch needs help |
| By Dan (Remington, IN) |
Either my pump is defective, or they have not perfected the Switch Genius feature.
Every time it runs, it keeps going for about 5 extra seconds sucking air- it's very noisy. Sometimes it runs and runs and runs even though there is no water in the pit.
The manual says it is important to keep the switch sensor clean. I do, but it can be squeaky clean and still it doesn't work right.
SPD RESPONDS: Please contact the folks at Wayne Tech Support (toll free) at 800-237-0987 to see if they have any advice for your situation.
You may also wish use the Service Center link at the bottom of our web site to find the Wayne authorized service center near you.
The unit comes with a 5 year factory warranty that will cover defects in materials and / or workmanship. |
|
|

|

- Next-Day Delivery Available
- Additional Shipping Rates Apply
- Select During Checkout
|
|
Learn More
|
Learn More
|
You may also like...
|
|
|
|
|