Zoeller M267 - 1/2 HP Cast Iron Sewage Pump w/ Vertical Float Switch (2")
Your Online Zoeller sump pumps Superstore.
|
 |
Zoeller 1/2 HP Cast Iron Sewage Pump w/ Vertical Float Switch (2")
Automatic Submersible Sewage / Ejector Pump
• Ideal for average to above average sewage removal
Durable Cast Iron Design
• Switch case, base, motor & pump housing
No Sheet Metal Parts To Rust Or Corrode
• Stainless steel screws, guard, handle, arm and seal assembly
Thermally Protected Motor
• Oil-filled and hermetically sealed to prevent overheating
Non-Clogging Vortex Impeller Design
• Capable of passing 2" spherical solids
Carbon & Ceramic Shaft Seal
• Assures maximum protection for extended pump life
Powder Coated Epoxy Finish
• Provides a corrosion resistant exterior
Added Features:
• Neoprene square ring & gasket
• Completely submersible, watertight and dust tight
Industry Leading Quality Control
• Entire unit is pressure tested after assembly
|
| Model |
| Model Number: | M267 |
| UPC: | 053514017613 | | Manufacturer: | Zoeller | | Housing Material: | Cast-Iron | | Min Sump Basin Size: | 18 Inch |
| Motor |
| Motor Amps: | 10.4 Amps | | Thermal Protection: | Yes | | Power Cord Length: | 10 Feet | | Oil Free Motor: | No |
| Pump |
| Float Type: | Vertical Float | | GPH @ 0 feet: | 7680 GPH | | GPH @ 5 feet: | 7680 GPH | | GPH @ 10 feet: | 5340 GPH | | GPH @ 15 feet: | 3000 GPH | | GPH @ 20 feet: | 600 GPH | | Discharge Port Size: | 2 Inch | | Built-in check Valve: | No |
| Overview |
| Float On: | 12 Inches | | Float Off: | 4 Inches | | Manual Override: | No | | Solid Handling: | 2 Inch | | Weight: | 47.5 Lbs. (21.55 kilograms) | | Dimensions: | 12.5L x 12.5W x 14.25H
(31.75 x 31.75 x 36.20 cm) | | Consumer Warranty: | 1 Year | |
|
Average Rating: 5.0 of 5.0
|
|
|
 |
 |
| Sump Pumps Direct Recommendation |
| By Sump Pumps Direct |
Model M267 from Zoeller gets our “Best” sewage pump recommendation.
This pump is a beast and weighs in at almost 50 pounds. Zoeller builds high quality pumps and this pump is true to form.
The M267 is heavy duty from top to bottom. Cast iron construction for the vital parts, such as motor housing, base and volute are essential if you want a pump to last for a long time.
Combine that with stainless steel fasteners and components, and it’s clear that Zoeller knows how to build pumps.
The non-clogging vortex impeller allows this pump to pass solids with ease. With an oil-filled, thermally protected motor, this pump can handle almost anything.
Zoeller gives this pump a powder coated epoxy finish that prevents corrosion. This is extremely beneficial in conditions such as a sewage basin.
All of their pumps are pressure tested before they leave the factory. It provides a piece of mind that they stand behind their pumps.
We give Zoeller model M267 our “Best” recommendation and it lives up to the hype.
|
 | |
Written April 15, 2010 |
| Pumping high water table |
| By Denis Beauchemin (Greene, RI) |
Well, it hasn’t rained since I installed the pump, so it’s hard to tell how well it works.
But, from what I can see on how it’s pumping the residual water from the high water table, it will do the job very nicely. |
|
|
|
- Next-Day Delivery Available
- Additional Shipping Rates Apply
- Select During Checkout
|
|
Learn More
|
Learn More
|
You may also like...
|
|
|
|
|
We Ship To: 
Contact Us
