PHCC Pro Series ST1033-DFC1
PHCC Pro Series ST1033-DFC1
PHCC Pro Series ST1033-DFC1
Hover to zoom
1 Of 5
PHCC Pro Series ST1033-DFC1
PHCC Pro Series ST1033-DFC1

Pro Series ST1033 1/3 HP Cast Iron Submersible Sump Pump w/ Dual Float Switch

Model:

ST1033-DFC1

Write a Review
$149.99
Free Shipping
  Learn More About Free Freight
In-Stock
Ships in 1-3 Business Days
Shipping to60601
Pro Series ST1033 1/3 HP Cast Iron Submersible Sump Pump w/ Dual Float Switch
Pro Series ST1033 1/3 HP Cast Iron Submersible Sump Pump w/ Dual Float Switch
Model: ST1033-DFC1
$149.99
Features
Specifications
Reviews
Product Q&A
Accessories
How-To Articles
Manuals
Share

Features

Style

Primary

GPH

4100 Gallons

Switch Type

Dual Vertical Sensor

  • Cast Iron/Cast Aluminum Construction
  • Energy Efficient Permanent Split Capacitor (PSC) Motor
  • Permanent split capacitor (PSC) motor and dual ball bearings
  • Allow for lower amp draw
  • Piggy-back Dual Float Switch with Protective Cage
  • Continuous Duty Rated
  • Stainless Steel Shaft
  • Dual Carbon/Ceramic Seals
  • 10 Cord
  • Will Fit in 10 Diameter Sump Pit
  • Water Cooled (No Oil)
  • 18 Month Warranty (1 year for Continuous Duty)

Specifications

ST1033-DFC1
specs product image PID-6564
Base
Base Material
Cast Iron
Min Sump Basin Size
10 Inch
Motor
Voltage
120 Volt
Running Amps
3.8
Thermal Protection
Yes
Power Cord Length
10 Feet
Oil Free Motor
Yes
Starting Amps
7.6
Pump
Housing Material
Cast Iron
Impeller Material
Composite
Handles Solids
No
Float Type
Dual Vertical Sensor
GPH @ 0 feet
4100
GPH @ 10 feet
2770
Discharge Port Size
1-1/2 Inch
Built-in check Valve
No
Float On
Adjustable
Float Off
Timer Based
Manual Override
Yes
Max Head
29 Feet
Submersible
Yes
Engine
Horsepower
.33 hp
Overview
Weight
17 Pounds
Made in USA
No
Consumer Warranty
1 Year
Product Length
7.5 Inches
Product Width
5 Inches
Product Height
13.75 Inches
UPC
717301121968
Additional Model Numbers

ST1033, ST1033-DFC1

Reviews

(21)
PHCC Pro Series ST1033-DFC1 Reviews & Ratings

Product Q&A

(4)
Product Questions Answered by Jim, the Sump Pump Expert
Question
+
What does min. sump basin size mean?
John D 
from Massachusetts 
February 02, 2013
Answer
The minimum sump basin size relates to the minimum size of your sump basin or pit, that a specific pump will safely operate in. Any pump needs a certain amount of space due to "on/off" levels, cooling factors and cycling that the pump is designed for. Most pumps will require a standard size basin of 18" wide by 24" deep but some will also operate in smaller basins. You want to pay very close attention to these requirements as they will insure a longer pump life.
Was this answer helpful?
Yes
1
No
1
Question
+
I would like to know how many watts a 1/3 or 1/2 hp sump pump has, because i was think of buying a portable generator in case the power goes off.
Tom B. 
from New York 
September 03, 2012
Answer
That really depends on the pump. Some are more efficient than others. For example, the 1/3HP Basement Watchdog model BW1033 has a running amp rating of 3.5 and a starting amp rating of 7. When you figure the watts by the formula of amps times volts equals watts ( A X V = W), you get 420 running watts and 840 starting watts. But when you look at the Zoeller 1/3HP model M53, that pump has a running amp rating of 9.6 and a starting amp rating of 29.6 or 1152 running watts and 3552 starting watts.
Was this answer helpful?
Yes
1
No
0
Question
+
Looking for a pump that will run continuously for a water fall. Pumping about 7 vertical feet and 20 horizontal feet. Waterfall is about 15 feet long and one and a half to two feet wide.
Todd Wragge 
from Iowa 
January 04, 2012
Answer
The Pro Series pumps are rated for continuous duty and may be used in applications requiring continuous pumping including fountains, ponds, etc. For use in any continuous duty application the pump should be plugged directly into the wall outlet without the use of the controller. The outlet must be a single phase properly grounded 3-prong receptacle, 115V, 60HZ (preferably with ground fault
circuit interrupt). For continuous duty operation, the pump must be submerged at least 3/4 of the depth of the pump at all times.
Other pumps that you could consider for this application would be the BASEMENT WATCHDOG and STORMPRO pumps.
Was this answer helpful?
Yes
1
No
0
Question
+
I need a small sump pump that will withstand pumping 15% sodium hypochlorite (bleach).
Tim Fitzgerald 
from North Carolina 
April 28, 2011
Answer
While this pump will work, it is not designed to pump anything other that rain water. Pumping any kind of chemicals or bleach, even diluted, will reduce the life of the pump, not to mention, also voiding the warranty. You might look at the PHCC Pro Series Model DCM-050 chemical pump.
Was this answer helpful?
Yes
0
No
0

Recommended Accessories

Sump Pumps Direct expert image
Expert Recommended Accessories Selected by Jim, our Expert
Required Accessories 9
These accessories are required to properly setup/install this product.
Optional Accessories 10

How-To Articles

How To Pick The Perfect Pedestal Sump Pump
How To Pick The Perfect Pedestal Sump Pump
Pedestal sump pumps sit on a pedestal that keeps them out of the water. Unlike ...
Introducing Goulds Pumps
Introducing Goulds Pumps
Born, raised, and built in the U.S.A., Goulds Water Technology is an American m...
How To Pick The Perfect Sump Pump
How To Pick The Perfect Sump Pump
You'll hardly think about your sump pump until it's too late. If your sump pump...
Sump Pumps How-To Library
Sump Pumps How-To Library
Articles, Tips and Buying Guides from Our Experts

Manuals

ST1033-DFC1
 
Media Gallery
Pro Series ST1033 1/3 HP Cast Iron Submersible Sump Pump w/ Dual Float Switch
PHCC Pro Series ST1033-DFC1
+
Reset View
PHCC Pro Series ST1033-DFC1
PHCC Pro Series ST1033-DFC1
Customer Review Images