Reliance Controls Freeze/Flood/Power Failure Monitoring System & Dialer
Reliance Controls Freeze/Flood/Power Failure Monitoring System & Dialer
+
Share This Product
-
Product Description
-
1Reviews
-
3Product Q&A
-
Recommended Accessories
-
How-To Articles
-
Manuals
Product Description
+−
Features
Features
- Home Monitoring System
- Monitors your home or cabin when you are gone
- Alerts for freezing temperatures, power failures, and flooding
- FCC Approved
- One Year Limited Warranty
- Easy Installation and Use
- Installs and programs in minutes with no wiring
- Connects in seconds to phone jack and power outlet
- Plug-in Water sensor detects flooding with 25' cable
- Calls up to three numbers in an emergency
- Clear voice message identifies the problem
- Important
- System cannot call out on an Internet phone line during a power
- Outage because the Internet phone system needs power to work
Specifications
Product Specs
Frequency
60 Hertz
Overview
Weight
2 Pounds
Consumer Warranty
1 Year
UPC
851890000058
Features
Features
- Home Monitoring System
- Monitors your home or cabin when you are gone
- Alerts for freezing temperatures, power failures, and flooding
- FCC Approved
- One Year Limited Warranty
- Easy Installation and Use
- Installs and programs in minutes with no wiring
- Connects in seconds to phone jack and power outlet
- Plug-in Water sensor detects flooding with 25' cable
- Calls up to three numbers in an emergency
- Clear voice message identifies the problem
- Important
- System cannot call out on an Internet phone line during a power
- Outage because the Internet phone system needs power to work
Specifications
Product Specs
Frequency
60 Hertz
Overview
Weight
2 Pounds
Consumer Warranty
1 Year
UPC
851890000058
Product Specs
+−
Specifications
Product Specs
Frequency
60 Hertz
Overview
Weight
2 Pounds
Consumer Warranty
1 Year
UPC
851890000058
Product Q&A
(3)
+−
Search Product Q&A's
Answered by Jim, the Sump Pump Expert
+−
Can the temperature at which the device alarms be programmed, or will it alarm only at a temperature determined by the device manufacturer?
William H
from Pennsylvania
February 12, 2016
Answer
The temperature setting cannot be programmed. A temperature drop to below 45 degrees F +/-3 degrees F (7C +/- 2C) at the control panel will result in an alarm and call.
+−
Does the THP201 use a battery, draw power from the phone line, or have a wall wart plug?
Bryce
from California
December 06, 2013
Answer
The Reliance THP201 operated off 120V power via a AC/DC wall adapter and a 9B battery to operate during power outages.
+−
How does the Reliance device detect flooding and power failure if it's plugged in and there is no power? What happens if there is no answer to the three numbers provided?
Judy Medford
from Michigan
July 26, 2011
Answer
A water sensor is housed in a separate plug-in accessory, which is included with Model Number THP201. The water sensor can be placed up to 100 feet from the control panel using additional telephone line.
A single or multiple alarm condition will initiate the phone-out sequence features of this monitoring system. After a 5- or 30-minute delay (depending on the switch setting selected for the “Call Delay Time”) the monitoring system will call the first programmed telephone number and wait up to 10 rings for the called telephone to answer. If the called telephone does not answer, or answers and no response code keys are pressed, the monitoring system will call a second and third telephone number (if programmed), each time allowing 10 rings. The monitoring system will continue the calling sequence at 15-minute intervals until a called phone is answered and a response code is entered, or until an alarm condition no longer exists.
A single or multiple alarm condition will initiate the phone-out sequence features of this monitoring system. After a 5- or 30-minute delay (depending on the switch setting selected for the “Call Delay Time”) the monitoring system will call the first programmed telephone number and wait up to 10 rings for the called telephone to answer. If the called telephone does not answer, or answers and no response code keys are pressed, the monitoring system will call a second and third telephone number (if programmed), each time allowing 10 rings. The monitoring system will continue the calling sequence at 15-minute intervals until a called phone is answered and a response code is entered, or until an alarm condition no longer exists.
Recommended Accessories
+−
Expert Recommended Accessories
Hand Picked By Our Expert Jim
Required Accessories
Add All Required
Optional Accessories
How-To Articles
+−
By Jim O.
Manuals
+−
+
Ask Jim, Our Product Expert, A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
×
Reliance Controls Freeze/Flood/Power Failure Monitoring System & Dialer
×
Customer Review Images
